DESIGN AND IMPLEMENTATION OF AN IOT-BASED REMOTE LIGHTING CONTROL SYSTEM FOR SMART HOME APPLICATIONS
Keywords:
Electrical energy, Internet of Things, NodeMCU ESP8266, Remote control system, Smart homeAbstract
This study aims to design and develop a remote-controlled lighting system for smart homes based on Internet of Things (IoT) technology. The rapid advancement of information and communication technology has enabled the integration of physical devices with internet networks, allowing remote monitoring and control. In this research, a prototype system was developed using the NodeMCU ESP8266 microcontroller, relay module, LCD display, and Blynk application as the user interface. The system allows users to turn lights on and off remotely via a smartphone connected to the internet.
The research employed a Research and Development (R&D) method with the ADDIE model, including analysis, design, development, implementation, and evaluation stages. Data were collected through experimental testing under various distances and internet signal strengths. The results indicate that the system successfully operates in real-time with stable performance, although response time is influenced by network quality.
This system demonstrates the practical application of physics concepts such as electric current, electromagnetic waves, and electrical energy conversion. The developed prototype offers an efficient, flexible, and user-friendly solution for home automation. It also contributes to energy efficiency and supports the development of smart living environments.
References
Ahmad, R. N., Vania, N. F., & Wijanarko, J. R. (2024). Utilization of vibration as a source of electrical energy generation. ELECTRON: Jurnal Ilmiah Teknik Elektro, 5(1), 1–8. https://doi.org/10.33019/electron.v5i1.107
Albab, Z. U., Pratiwi, D. N., Laili, S. N., Hafiza, A., & Jahrudin, A. (2021). Magneto electrical: A future energy source. Schrodinger: Jurnal Ilmiah Mahasiswa Pendidikan Fisika, 2(2), 133–139. https://doi.org/10.30998/sch.v2i2.4361
Andi Mulkan. (2022). Analysis of wind energy utilization as a source of electrical power generation. Jurnal Ilmiah Teknik Unida, 3(1), 74–83. https://doi.org/10.55616/jitu.v3i1.308
Aryani, A., S. D., Ma’ruf, A., Alwi, D. P., & Rusdiana, D. (2022). Implementation of Faraday’s law demonstration tools. Jurnal Cerdik: Jurnal Pendidikan dan Pengajaran, 2(1), 75–97. https://doi.org/10.21776/ub.jcerdik.2022.002.01.07
Fitriani, F., Suwarno, & M.A., R. (2018). Study of renewable energy potential utilization in Indonesia. Jurnal Energi dan Lingkungan.
Griffiths, D. J. (2013). Introduction to electrodynamics (4th ed.). Pearson Education.
Harefa, A. E., & Humendru, C. J. (2024). Study of magnetic fields and their applications in basic physics. Jurnal Ilmu Ekonomi, Pendidikan dan Teknik, 1(3), 127–133.
Jati, B. M. E., & Priyambodo, T. K. (2024). Basic physics: Electricity, magnetism, optics, and modern physics for science and engineering students. Penerbit Andi.
Kurniawan, Y., & Zulkifli. (2019). Design of electricity generator using solenoid based on magnetic flux utilization. RELE (Rekayasa Elektrikal dan Energi): Jurnal Teknik Elektro, 2(1), 9–13. https://doi.org/10.30596/rele.v2i1.3111
Mahendra, A. (2024). Design of electricity generator using motorcycle magnet coil. Retrieved from https://repository.arraniry.ac.id
Prastyaningrum, I., Kartikawati, S., & Antika, R. (2020). The effect of electromagnetic induction EMF KIT media on students’ conceptual understanding. Jurnal Teknologi Terapan, 3(2), 208–213.
Ritonga, M. J. (2025). Analysis of the Role of Magnetism in Modern Technology in Everyday Life ; Literature Study Review. 3, 26–32
Rusianto, T., & Susastriawan, A. A. P. (2021). Mechanical vibration. AKPRIND Press.
Siregar, M. R. S., & Sakti, G. (2018). Design of electromagnetic induction trainer based on Lenz’s law and Faraday’s law as a learning medium. Prosiding SNITP (Seminar Nasional Inovasi Teknologi Penerbangan), 2(1). https://doi.org/10.46491/snitp.v2i1.244
Solikah, A. A., & Bramastia, B. (2024). Systematic literature review: Study of potential and utilization of renewable energy resources in Indonesia. Jurnal Energi Baru dan Terbarukan, 5(1), 27–43. https://doi.org/10.14710/jebt.2024.21742
Verina, E., Al-hibbi, N., Afil, R. A., & Nara, S. (2025). The Use of Fiber Bragg Grating as a Sensor High Accuracy Temperature. 3, 8–15
Widodo, S., Suharno, K., Mujiarto, S., & Rasyidi, N. R. (2018). Effect of blade number variation in hydropower systems on generated power. Journal of Mechanical Engineering, 2(2), 46–52.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Teti Novrianti, Sylvia Anjani, Riza Andriani
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
